6.4.2 How to Set Up your Computer for Direct Connect
Follow these instructions to set up your PC or notebook. Check with your administrator if
you are unable to change the settings as described here since you may need administrator
privileges. The instructions are specifically for Windows 2000, but the interface is similar
for other versions of Windows.
TIP: If you are using a PC that is already on a network, you will disconnect the PC from
that network to run these sample programs. Write down the existing settings before
changing them to facilitate restoring them when you are finished with the sample pro-
grams and reconnect your PC to the network.
1. Go to the control panel ( Start > Settings > Control Panel ), and then double-click the
Network icon.
2. Select the network interface card used for the Ethernet interface you intend to use (e.g.,
TCP/IP Xircom Credit Card Network Adapter ) and click on the “Properties” button.
Depending on which version of Windows your PC is running, you may have to select
the “Local Area Connection” first, and then click on the “Properties” button to bring up
the Ethernet interface dialog. Then “Configure” your interface card for a “10Base-T
Half-Duplex” or an “Auto-Negotiation” connection on the “Advanced” tab.
NOTE: Your network interface card will likely have a different name.
3. Now select the IP Address tab, and check Specify an IP Address , or select TCP/IP and
click on “Properties” to assign an IP address to your computer (this will disable “obtain
an IP address automatically”):
IP Address : 10.10.6.101
Netmask : 255.255.255.0
Default gateway : 10.10.6.1
4. Click <OK> or <Close> to exit the various dialog boxes.
RCM3360/RCM3370
IP 10.10.6.101
System
Netmask
255.255.255.0
User ’s PC
Ethernet
crossover
cable
Direct Connection PC to RCM3360/RCM3370 Board
User ’s Manual
57
相关PDF资料
101-1050-BE-00025 ADPT USB 2 A FEMALE-2 5PIN .25M
10112627-101LF MINI-SAS HD 1X2 EXT PCB
10112628-101LF MINI-SAS HD 1X4 EXT PCB
10136-3000PC CONN MINI-D 36POS SOLDER PLUG
10136-6000EC CONN MDR PLUG 36POS IDC GOLD
10150-4CZ3PL CONN MDR PLUG 50POS VERT T/H
10150-72E2PC CONN MINI-D 50POS R/A PLUG
10150-8000EE CONN PLUG 50 POS MINI-D
相关代理商/技术参数
101-0955 功能描述:模块化系统 - SOM RCM2260 RABBITCORE MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101-0956 功能描述:开发板和工具包 - 其他处理器 Powercore Flex Kit US Version RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-0957 功能描述:开发板和工具包 - 其他处理器 Powercore Flex Kit International Vers. RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-0961 功能描述:模块化系统 - SOM RCM3720 CORE MOD. RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
10-109611-3S 制造商:Amphenol Corporation 功能描述:10-109611-03S - Bulk
10-109611-4S 制造商:Amphenol Corporation 功能描述:10-109611-04S - Bulk
10-109614-02S 制造商:Amphenol Corporation 功能描述:ER 4C 4#16S SKT PLUG
10-109614-05P 制造商:Amphenol Industrial Operations 功能描述:ER 5C 5#16S PIN PLUG